高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

介质对配合物稳定性的影响——Ⅱ.Cu(SCN)+—NaNO3—二氧六环—水体系

本文用分光光度法确定了25℃时配阳离子Cu(SCN)~+在NaNO_3—二氧六环—H_2O介质中的稳定常数。溶剂组成变化范围为0,5,10,15和20wt％二氧六环,离子强度范围为0.2～3.0moledm~(-3),溶液的pH=1.5～1.6。本文提出了基于Pitzer方程式的最小二乘多项式逼近法,确定出各种不同组成混合溶剂中配合物的热力学稳定常数。讨论了该常数和一级介质效应与溶剂组成和介电常数的关系。     

ANN原子参数法预报合金相晶型及晶格常数

运用人工神经网络方法，以二元合金组成元素的电子结构为基本特征，对二元合金相晶型作了区分，进一步对其晶格常数作了预报，结果令人满意。     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Thermodynamics of the dissociation of 2-aminopyridinium ion in synthetic seawater and a standard for pH in marine systems

Buffer solutions composed of 2-aminopyridinium chloride and 2-aminopyridine in synthetic seawater are useful as a supplement to buffers of Tris (pH 8.2) and Bis (pH 8.8) in standardizing measurements of hydrogen ion concentration (pm _H or pH(SWS)) in oceanography. The dissociation constant of 2-amino-pyridinium ion over the range of salinities (S) from 30 to 40 has now been determined from the emf of cells without liquid junction at eight temperatures (T) from 278.15 to 313.15 K. The results fit the equation pK=2498.31/T–15.3274+2.4050 lnT+S(0.012928–2.9417×10^–5T) with a standard deviation of 0.0023. Thermodynamic constants for the dissociation process and standard reference values of pm _H and pH(SWS) were derived from the data. The pm _H of the buffer consisting of 2-aminopyridinium chloride and 2-aminopyridine (each 0.04 molal) in synthetic seawater of salinity 35 varies from 7.356 at 278.15 K to 6.601 at 313.15 K.     

双冠醚研究(Ⅳ)——Schiff碱型和仲胺型双-(苯并15冠-5)对碱金属苦味酸盐的萃取行为

仲胺型双冠醚与四苯硼酸碱金属盐在丙酮溶液中。25℃下的电导说明它们与Na~+可能形成1∶1络合物(冠醚单元∶金属离子),而与K~+、Rb~+、Cs~+离子则形成2∶1络合物。用Schlff碱型和仲胺型双-(苯并15-冠-5)在水-氯仿体系中进行萃取,测量了分配比D和萃取平衡常数K,发现后者的K值均大于前者。双冠醚F_2对K~+的萃取能力最强,选择性最佳。     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

Temperature regulation for thermal analysis under microwave radiation

In a microwave study a program was designed for thermal regulation. This software allows different types of regulations: P, PI, PD or PID (proportional integration derivation). Results obtained with PID and PI regulation for different previous linear heating schedules (1 deg·s^?1 and 0.15 deg·s^?1) imposed on a polymer sample (DGEBA/3DCM) up to 280°C and more are reported. Mathematical resolution of thermal laws applied to the sample permits the regulation constants (T _i,T _d andG _s) to be linked to the physical features of the polymer. A method used to calculate: the reflexion constant of the wave on the polymer, ρ and the diminution factor, α is presented.